Do you own a DSC wireless or hybrid system and have wished that you could get out more than 500-600 ft. for your wireless transmission? Well we have acquired the new DSC WS4920HE Wireless Repeater Module just for someone like you. You can also use this unit within the panels original 500-600 radius to strengthen the signal if you have problem areas with electrical noise.
You can add up to four of these per alarm system. Important to note is that they will not be able to handle wireless sirens or keypads. They will also take up a zone in the main panel, so you have to figure that in. Every device that gets learned into the repeater will also have to be programmed into the main panel as well.
We are very happy to be able to give you something that will expand and strengthen your system's wireless capability!
|Temperature Range||-10C to +55C (14F-131F) NOTE: UL/ULC tested for 0C to +49C (32F to 122F), 85%R.H.|
|Humidity (Max)||5% - 93% R.H. non-condensing|
|Battery Type||Rechargeable Ni-MH, 4.8V/2.1 AH (UL Listed as an LPS. Replace battery every 3-5 years)|
|Battery Backup Time||24 hours|
|Battery Charging Rate||80% within 24 hours|
|Battery Charging Current||170 mA|
|Operating Frequency||433.92 MHz|
|Dimensions||H6.96, W4.47, D1.33 in. (H17.68, W11.35, D3.38 cm)|
|Weight||.77 lb. (.35kg)|
- Greatly extends the range of DSC 1-way wireless devices
- Backward compatible with existing security systems including ALEXOR, PowerSeries and MAXSYS
- Identifies the optimal location for mounting - taking in to consideration noise and interference
- Quick enrolment of DSC 1-way wireless devices
- Status LEDs for AC, battery and RF Jam
- Up to four repeaters can be supported per system
- Supports up to 164 wireless devices
- Wall and case tamper protection
- Esthetically pleasing design