A lot of you are interested in Central Station Monitoring Service but are at a loss of how to get signals sent over to the monitoring station. Either you don't have a land-line or a GSM cellular communicator would have too poor of a signal to work in your location. Well now, with the Honeywell 7847i IP Communicator, and a broadband
If you want central station monitoring service but don't have a land-line and you don't get a good cellular signal and you have a broadband internet connection, then the Honeywell 7847i IP Communicator is the solution that you are looking for!
The 7847i sends communication via Alarmnet to your central station and the signals sent are secure and encrypted for your protection.
Base Alarm Monitoring and Alarmnet fees required for use
• Operating voltage: 12VDC
• Current Drain: 75m
• Radio Fault Output:
• Input Trigger Levels: (V+) 2V-14V
• Network Standard: IEEE 802.3u
• Data Rate: 10Base-T/100Base-T
with auto detect
• Ethernet Cable: Cat.5 (min),
MDI/MDI-X auto crossover
• Dimensions: 8.4" x 8.0" x 1.5"
• Weight: 1lb.
• Operating temperature:
-20º C to 55º C (-4º F to 131º F)
• Storage temperature:
-40º C to 80º C (-40º F to 176º F)
• Humidity: 0-95% relative humidity,