The IPCAM-WOKT1 is a kit that you can purchase if you are wanting to start using Honeywell Total Connect Video service. You get one WAP and one outdoor wireless camera. If you have ever wanted to keep an eye on an out building or make sure no one is intruding onto your property, then you can get this kit and not break the bank doing it.
People who have the Total Connect Video subscription can view activity around their homes via PC or mobile device. They use a WPS setup and the connection to the cameras is very secure. Note: Honeywell Total Connect Required
Specifications:WOCAM
Video Image Sensor Omnivision OV7740 1/5" CMOS Sensor
LENS F2.0 Fixed Focus (FOV 62° diagonal)
Compression MPEG-4/M-JPEG Dual Stream
Resolution Support 640 x 480, 320 x 240, 160 x 120
Frame Rate Up to 30 frames per second for all
streams at all resolutions
Image Control AWB, AGC, Sharpness, Brightness,
ACE, Image Quality, Time Stamp and Text Overlay
Wireless (RC8061) Standard IEEE 802.11B/G/N
Encryptions WEP 64 Bits/128 Bits, WPA/WPA2
Personal, WPS
Hardware LED Indicator Network/WPS
Connectors (Waterproof) Ethernet, RJ45 connector,
power jack, 2.5mm phone jack, reset tack switch
Motion Sensor 9.84 ft. to 16.4 ft., 60° coverage
Power Adapter External power adapter: 12V/1A,
100 to 240 VAC, switching
Certification CE/FCC Listed
Dimensions 4.05" H x 3.7" W x 1.46" D
Weight 1.98 lbs. (900g)
Operating Temperature -10° F 113° F (-23° C 45° C)
Housing Structure
Top cover: plastic
Rear housing: casting metal
Stand: metal
Infra Red Automatic IR-cut switcher for Day/Night
mode switching to get better video quality
(IR distance = up to 25 feet)
IR LED for enhancing low light performance
Built-in light sensor for detecting light sensitivity
more accurately
WAP
802.11 G/N Wi-Fi Protocols
Supports Total Connect Video applications
Optimized for Video Streaming
Enhanced Network Security
Simple configuration using Wi-Fi Protected
Setup (WPS) 
