The Vista 20P 6160 Security System Kit features the 6160 alpha display keypad. The Vista series alarms require one of the 6160, 6160RF, or 6160V keypads for programming. The Honeywell Honeywell Vista 20P is a upper level system that can do eight hardwire zones out of the box, with the capability to do up to 48 zones total (wired or wireless) with the use of hardwire expansion and wireless expansion modules. Has two built in low current trigger outputs with expansion capability of up to 16 total. Features two system partitions, plus a common partition area, supports two wire (up to 16) and four wire type smokes, features up to 48 user codes, and a time stamped 100 event log viewable on the 6160 series model keypads.
The Vista 6160 Kit includes:
- 1 Vista 20P Control
- 1 6160 Alpha Programmable LCD keypad
- 1 IS235 Hardwired Motion Detector
- 1 Wave2 106db siren
- 1 PTC1640 Transformer
- 1 12volt 4amp battery
- 1 RJ31x phone jack
- Vista 20P User Guide and Programing Guide.
The 6160, 6160RF, or 6160V alpha programmable keypads are required for initial setup. You may use any of the other Honeywell keypads that are listed on our site for secondary keypads, but a 6160 series keypad is a must to program these panels. It makes going through programming mode a breeze, because of the alpha read out.
| Vista-20P |
|
|
Zones |
|
|
|
Total Zones | 48 |
|
|
Base Hardwired | 8 |
|
|
With Zone Doubling | 15 |
|
|
Hardwired Expandable | 40 |
|
|
Wireless Expandable | 40 |
|
|
Keyfob Zones (Do not take up protection zones) | 16 |
|
|
Partitions | 2 |
|
|
“Go To” Function |
|
