The Vista 20P 6160RF Security System Kit features the 6160RF (with built-in wireless receiver) alpha display keypad. The Vista series alarms require one of the 6160, 6160RF, or 6160V keypads for programming. The Ademco Honeywell Vista 20P is a upper level system that can do eight hardwire zones out of the box, with the capability to do up to 48 zones total (wired or wireless) with the use of hardwire expansion and wireless expansion modules. Has two built in low current trigger outputs with expansion capability of up to 16 total. Features two system partitions, plus a common partition area, supports two wire (up to 16) and four wire type smokes, features up to 48 user codes, and a time stamped 100 event log viewable on the 6160 series model keypads. The Vista 6160RF Kit includes: 1 Vista 20P Control, 1 6160RF Alpha Programmable LCD keypad (with built-in wireless receiver), 1 IS235 Hardwired Motion Detector, 1 Wave2 106db siren, 1 PTC1640 Transformer, 1 12volt 4amp battery, 1 RJ31x phone jack, Vista 15P User Guide and Programing Guide.

The 6160, 6160RF, or 6160V alpha programmable keypads are required for initial setup. You may use any of the other Honeywell keypads that are listed on our site for secondary keypads, but a 6160 series keypad is a must to program these panels. It makes go through programming mode a breeze because of the alpha read out.

	Vista-20P
Zones
Total Zones	48
Base Hardwired	8
With Zone Doubling	15
Hardwired Expandable	40
Wireless Expandable	40
Keyfob Zones (Do not take up protection zones)	16
Partitions	2
“Go To” Function	Yes
Common Lobby	Yes
Global Arm/Disarm	Yes
Partition Account Numbers	Yes
16 Character Descriptions	Yes
User Codes	48
Output Devices	18
On-board Triggers	2
X-10 or Relays	16
Event Log
Viewable at keypad with time-date stamp	100
Graphic keypad support	Yes
Internet support	Yes